Feed conditions
Composition, rates, pressure, temperature and operating envelope.
Project logic
Mobile infrastructure engineered as one process system
We start with feed conditions, required outcomes and site constraints, then define the process route, module set and battery limits.
Required outcome
Oil, water, gas or distillate outlet specification.
Site constraints
Climate, logistics, utilities and available tie-ins.
Facility configuration
Process route, modules, automation and battery limits.
Core capability
Core mobile facilities
From a single functional package to a complete early-production facility. Equipment scope is engineered for each field.
MUPSV
Mobile Produced-Water Separation Unit
A mobile three-phase facility for separating gas, oil and produced water directly at a well pad or field site.
View details
PKIOS
Mobile Well Testing and Clean-up Package
A surface equipment package for controlled well start-up, clean-up, separation, measurement and temporary production.
View details
MUPN
Mobile Oil Treatment Facility
A multistage mobile facility for oil separation, dehydration, desalting, metering and export.
View details
MKOS
Mobile Well Clean-up and Early Production Facility
An extended facility for receiving one or more wellstreams, multistage separation, treatment, metering and outlet routing.
View details
MUPG
Mobile Gas Treatment Facility
A modular facility for treating natural or associated gas to the requirements of a consumer, gathering line or pipeline.
View details
MBPN
Mobile Oil Treatment Module
A single- or compact multi-module solution for heating, separation, settling and dehydration of oil emulsion.
View detailsOperating reference
MUPSV technology proven in operation
Operating results from three units. Customer and asset names are withheld.
The process removes the main produced-water load at the field site and returns the oil phase to gathering. Project guarantees are established from wellstream analysis.
MUPSV process and scope| Liquid rate | Pressure | Water removed | Oil in separated water at outlet | Solids in separated water at outlet |
|---|---|---|---|---|
| Site 11,000 m³/d | 6.3 MPa | 750 m³/d | 14 mg/L | 4.2 mg/L |
| Site 22,000 m³/d | 4.0 MPa | 1,600 m³/d | 17 mg/L | 6.7 mg/L |
| Site 31,200 m³/d | 6.3 MPa | 850 m³/d | 15.3 mg/L | 7.1 mg/L |
Manufacturing
Manufacturing and factory completion
Qualified personnel, certified in-house equipment and integrated module assembly at the manufacturing site.
Welding, assembly and process piping
Mechanical, instrumentation and electrical integration
Factory inspection and shipment preparation
Transportable configuration for project logistics
Equipment directory
Process equipment portfolio
Standalone equipment and packaged units for brownfield upgrades and integration into mobile facilities.
01
Metering Systems
AGZU and oil, gas and water metering systems.
02Separation Equipment
Gas, two-phase, three-phase and special separators.
03Heaters and Furnaces
Line heaters, mobile heaters, combined heaters, process furnaces, coils, fireboxes and upgrade packages.
04Flare and Vent Systems
Open, enclosed and horizontal flares, liquid treatment and vent stacks.
05Dehydration and Desalting
Controlled mixing packages and electrostatic dehydrators.
06Vessels and Tanks
ON oil settlers, OV water settlers, horizontal tanks and underground drain vessels.
07Auxiliary Process Packages
Chemical, fuel-gas, gas and liquid filtration, service-specific pumping, compression, manifold, heat-exchange and pigging packages.
08Modular Buildings
Control rooms, laboratories, electrical and process buildings.
MUPSD-40N · technical catalogueLocal feed processing
MUPSD: middle-distillate production at the field
A continuous mobile facility for processing conditioned hydrocarbon feed directly near the production site.
- Feed capacity
- up to 24–160 m³/d of feed
- Process routes
- atmospheric or vacuum
- Engineering basis
- representative feed testing
The unit recovers a middle-distillate stream. Yield and properties depend on feed composition, the selected process route and testing.
Engineering start
Data required for an initial study
A completed questionnaire helps define the process route, module dimensions, utilities and battery limits sooner.
The forms retain worked examples and vessel-volume fields. Parameters may be left for supplier calculation or completed with values from an existing design.
Start with operating data
Preliminary process review based on operating data
Send a questionnaire, technical specification or a short description of the feed and required outlet streams.